Display Illumination - ADE CK 2301 Bedienungsanleitung

Auto-stop function
If you do not press a button, the alarm switches off
automatically after 2 minutes.
After 24 hours, the alarm will be triggered again.
Interrupting the alarm for 24 hours
− Press any button (except
alarm. After 24 hours, the alarm will be triggered
again.
Repeat alarm (SNOOZE function)
− Press the
signal sounds. Indications
on the display.
The device will switch on again according to the
selected setting (the default setting is 5 minutes) to
wake you up again. This procedure can be repeated
multiple times.

Display illumination

Illuminating the display
− Press the
display backlight for approx. 8 seconds.
Using the night light function
− Holding the
3 seconds shows
the automatic brightness adjustment.
CK 2301 DCF radio-controlled clock
sensor field once when the alarm
sensor field to turn on the
sensor field for more than
on the display and turns on
) to interrupt the
or and flash
43