Inserting The Batteries; Setting The Time; Attaching The Wall Clock; Cleaning - ADE CK 1800 Bedienungsanleitung

Inserting the batteries

Inserting the batteries
− Insert the LR6 (AA) battery as indicated at the bottom of the battery compartment.
Pay attention to the correct polarity (+/-).
‚ The battery must be changed when the hands stop moving.
‚ Only use the type of battery that is specified in the "Technical data".
‚ Dispose of the old battery in an environmentally responsible way
(see "Disposal").

Setting the time

− Use the time knob to set the time.
Turn the knob only in the direction of the arrow shown.

Attaching the wall clock

A hanging loop is located on the back.
− Hang the clock up on a nail or a screw.
Ensure a secure attachment so that the clock does not fall off and become
damaged.

Cleaning

NOTE on material damage
− Do not immerse the clock in water or other liquids.
− Never use harsh, scouring or abrasive cleaning agents or the like to
clean the clock. Otherwise, the surface could be scratched.
− Remove dust from the wall clock with a soft, dry cloth, if necessary.
− The glass can also be cleaned with commercially available glass cleaners.

Fault/Remedy

Fault
No function
12
Possible cause
‚ Is the battery empty or inserted the wrong
way around?
Quartz wall clock CK 1800 | 1801