Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 2
3
4
5
6
2
1
62432.LT.AL.REM.003
2 Channel nr.
1 Switching point
1 2
3
4
5
6
2
2
62432.LT.AL.REM.004
2
Channel nr.
2
Switching point
4.2 Switching Times
4.2.1 Programming switching points
Each Channel has 16 programmable Switching Points (8 x
ON, 8 x OFF):
Nos. 1, 3, 5, 7, 9, 11, 13, 15 are Switch ON points
(lamp symbol ☼).
Nos. 2, 4, 6, 8, 10, 12, 14, 16 are Switch OFF points
(no symbol).
7
The Switch Time selected will be indicated by a number in the
lower right of the Display and the lamp symbol ☼.
The Channel number will be indicated above right.
Please note when programming:
Each switch ON point is closely linked to the following switch
OFF point
Switch-point 1: switch ON
7
Switch-point 2: switch OFF
Switch-point 3: switch ON
Switch-point 4: switch OFF
Etc.
They should always be programmed in pairs to avoid errors.
The shortest possible switching interval is 1 minute.
4.2.2 Setting the Switch ON Point
Proceed as follows:
• Set the right sliding switch to position P1 (Channel 1, CH)
or P2 (Channel 2, DHW). The first switch point (switch ON)
is displayed.
• Press button „1...7" to input the day of the week or blocks
of days.
• Continuous pressing of this button allows you to select indi-
vidual days and the following blocks of days:
Press once:
Press twice:
Press three times:
Press four times::
Press five times:
Press six times:
Press seven times:
Press eight times:
Press nine times:
Press ten times:
Press eleven times:
Arrows in the Display indicate days of the week.
• Press buttons „h" and „m" to set the time.
9
Day 1
(Monday)
Day 2
(Tuesday)
Day 3
(Wednesday)
Day 4
(Thursday)
Day 5
(Friday)
Day 6
(Saturday)
Day 7
(Sunday)
Block 1 to 5
(Monday to Friday)
Block 6 to 7
(Saturday to Sunday)
Block 1 to 6
(Monday to Saturday)
Block 1 to 7
(Monday to Sunday)
Werbung
Inhaltsverzeichnis
