LG AC18SQ Benutzerhandbuch Seite 26

Canceling Special Functions
1
Press FUNC button repeatedly to select the
desired function.
2
Press SET/CANCEL button to cancel the
function.
Using the Air Purification
Function
These functions supply clean and fresh air by
ion particles and the filter.
Function Display
Ionizer
Plasma
NOTE
• You can use this function without turning the
air conditioner on.
• Both the plasma lamp and the cooling lamp
light up while Smoke Away/Plasma is in
operation on some models.
• Do not touch ionizer during operation.
• This function may operate differently from the
remote control display.
26
Description
Ion particles
from Ionizer
reduce the
surface bacteria
and other
harmful
substances.
It removes
microscopic
contaminants
from the intake
air completely to
supply clean and
fresh air.
Using the Silent Function
This function prevents potential claims by
neighbors, reducing noise from outdoor units.
is displayed on the display screen.
•
NOTE
• This function is disabled when you press
MODE or ENERGY CTRL or JET MODE
button.
• This function is available with Cooling,
Heating, Auto Changeover, Auto Operation
Mode.
• When connected to the Multi Outdoor unit, this
function may not be supported.
Using the Auto Clean Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor unit.
This function removes such moisture.
is displayed on the display screen.
•
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• If you turn off the unit, the fan continues to run
for 30 minutes and cleans the inside of the
indoor unit.
is displayed on some indoor units,
•
depending on the model.
EN