Becker TC42 Betriebsanleitung Seite 45

FUNCTION (only when the control panel is detached, for
qualified technicians only)
ROLLER SHUTTER/VENETIAN BLIND, INITIAL OPERATION
(Selection of the shading solution, date of initial operation)
INITIAL OPERATION
1. Press the MENU button.
2. To select the FUNCTION menu, press the + button until FUNCTION ap-
pears.
3. Confirm with OK. ROLLER SHUTTER/VENETIAN BLIND appears.
4. You can choose between roller shutter/venetian blind using the +/- but-
tons.
5. Confirm with OK. EXPERT MODE OFF/ON appears.
6. You can select the desired setting using the +/- buttons.
7. Confirm your selection with OK. INITIAL OPERATION appears.
8. Confirm with OK. RELAY appears. (RELAY denotes the relay switching fre-
quency.)
9. Confirm with OK. TOTAL RUNNING TIME appears. (TOTAL RUNNING
TIME denotes the total running time of the timer.)
10. Confirm with OK. FUNCTION appears.
11. Press the MENU button to switch to Operating mode.
FUNCTION
RELAY
ROLLER SHUTTER
TOTAL RUNNING TIME
EXPERT MODE
FUNCTION
45 - en