Oki PT340 Bedienungsanleitung Seite 57

Item
8 USB Soft Reset
*1 " INIT(#25)Reset "
Only Dual interface model.
(2) Memory Switch 2 Group
Item
1
Cover Open Error
2
Error
3 Batch (COM IF)
4 Batch (Other IF)
5 Serial Number
6 ASB
7 Font-B
Description
Specifies whether a USB Soft Reset
triggers a hardware reset when using
printer class USB.
Description
Recovery method for Cover Open Error
during print
What to do at power on or after recovery
from error
"Auto Recovery": Perform auto recovery
to enable data reception.
"Recovery by CMND": Discard any
received data until a reset command is
received.
Specifies whether to use batch printing
for the serial interface
Specifies whether to use batch printing
for the USB or LAN interface
Specifies iSerial Number notification for
USB
"Disable": Returns "0" as the iSerial
Number.
"Enable": Returns the manufacturing
serial number as the iSerial
Number
Specifies whether to enable the automatic
status transmission function
(ASB: Automatic Status Back)
Specifies the number of columns for font
B (horizontal x vertical)
"Mode1" 10x24
"Mode2" 9x24
55
Setting Value
1 Enable
2 Disable
Setting Value
Auto Recovery
1
Recovery by CMND
2
1 Auto Recovery
2 Recovery by CMND
1 Enable
2 Disable
1 Enable
2 Disable
1 Enable
2 Disable
1 Enable
2 Disable
1 Mode1
2 Mode2