Setting The Temperature; Automatic Switch-Off; Switching Off; Cleaning And Maintenance - Sanitas SFW 10 Gebrauchsanweisung

4.4 Setting the temperature

Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
NOTE:
The fastest way to warm up the foot warmer is to initially set the highest temperature setting.
NOTE:
This foot warmer has a fast heating function, which allows the foot warmer to warm up faster in the
first 10 minutes.
WARNING
If the foot warmer is being used over several hours, we recommend that
you set the lowest temperature setting on the control to avoid overheat-
ing the feet, which may lead to burns to the skin.

4.5 Automatic switch-off

This foot warmer is equipped with an automatic switch-off function. This turns off the heat sup-
ply approx. 90 minutes after the initial use of the foot warmer. The temperature setting display
then starts to flash. So that the foot warmer can be switched back on, the sliding switch for ON/
OFF and temperature settings (5) must first be set to setting "0" (OFF). After about 5 seconds
it is possible to switch it on again.

4.6 Switching off

To switch the foot warmer off, set the sliding switch for ON/OFF and temperature settings to setting "0" (OFF).
The temperature settings are then no longer illuminated.
NOTE:
If the foot warmer is not in use, switch the sliding switch for ON/OFF and temperature settings to
setting "0" (OFF) and unplug the power plug from the socket.

5. Cleaning and maintenance

WARNING
Before cleaning, always remove the power plug from the socket first. Otherwise there is a risk of
electric shock.
CAUTION
The control must never come into contact with water or other liquids, as this may cause
damage.
• To clean the control, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
• Small marks on the foot warmer can be removed with a damp cloth and, if necessary, with a little liquid
detergent for delicate laundry.
14
90
min
STOP