Frequently Asked Questions; Technical Specifications - GOAL ZERO GUARDIAN 12V Bedienungsanleitung

FREQUENTLY ASKED QUESTION
Q: How do I know if my battery is charging?
A: The Guardian's battery light indicates charging status. Refer to
the previous page for specifics.
Q: How do I know if my power source (solar or AC) is connected
and working?
A: The light labeled "Power" will turn on whenever input power is
connected.
Q: Can the Guardian detect my battery level?
A: Yes. Refer to the previous page for LED indication specifics.
Q: Why are there two input ports?
A: Different Goal Zero solar panels have different sized
connectors. This is so that you can use the Guardian with most
Goal Zero panels. If your panel doesn't fit either of the inputs
visit www.GoalZero.com for available adapters.
Q: Can the Guardian work on any battery?
A: No, the Guardian 12V only works with (most) 12V lead acid
batteries. It is important to match the (V) voltage of the battery
you are trying to charge/maintain with the (V) voltage of the
Guardian.
Q: How can I get extension cords or other accessories to use with
my Guardian?
A: Visit www.GoalZero.com for a complete offering of Guardian
accessories.
Be sure to ACTIVATE YOUR WARRANTY at goalzero.com/warranty
4

TECHNICAL SPECIFICATIONS

Guardian 12V
Charge Controller
Ports
6mm Port (Output, 6mm)
Solar Port (Input, 8mm)
Solar Port (Input, 4.7mm)
General
Weight
Dimensions
Operating Usage Temp.
Certs
Warranty
Built-in PWM lead-acid controller
with five stages: 2 Pre-stages for
recovering low battery level, Bulk,
Absorb, and Float. Supports up
to 90W of solar panels, e.g. three
Boulder 30s.
11-14V, up to 6A (90W max)
15-20V, up to 6A (90W)
15-20V, up to 6A (90W)
3.2 oz (91 g)
5 x 2.5 x 1 in (12.7 x 6.4 x 2.5 cm)
32-104 F (0-40 C)
12 months
5