Built-In Webcam With Mic Array Support; System Requirements; Using The Device; Lifeframe 2 Software - Asus MK221 Serie Kurzanleitung

Built-in webcam with Mic Array support

The built-in 1.3 megapixel webcam with array microphones (Mic Array support)
allows you to take pictures, have a video conference, or record audio-video clips.
While chatting with friends via Internet-based communication tools, you can directly
show your vivid image and clear voice with this device.

System requirements

• A personal computer with Pentium
• Microsoft ® Windows
• Minimum 200 MB free hard disk space to run the program
• 128 MB of RAM or above
• A display card supporting 16-bit high color mode
•
•

Using the device

• The device transmits images and sound to your PC through the USB 2.0 port.
Therefore, make sure that the bundled USB 2.0 cable is connected to both the
LCD monitor and your PC before you use the device.
• The webcam is adjustable upward and downward as shown.
Do not turn the webcam upward or downward over 30
the webcam.

LifeFrame 2 software

ASUS MK221 provides the easy-to-use LifeFrame 2 software that can work with
the webcam, allowing users to create their own photos or video clips.
•
•

Installation instructions

1. Close all other applications.
2. Insert the support CD into the optical drive and run the LifeFrame 2
program.
3. Follow the on-screen instructions to complete the installation
4
® Vista / XP Service Pack 2 operating systems
Make sure that the bundled USB 2.0 cable is connected to both the LCD
monitor and your PC. Otherwise, the webcam will not be activated.
Make sure that you have installed the Windows
or later versions before using the device.
MIC ARRAY
MENU
LifeFrame 2 only supports Microsoft
operating systems.
The LifeFrame 2 software is bundled in the support CD.
Quick Start Guide
® III 800 MHz or higher processor
® Vista / XP Service Pack 2
-30˚–30˚
® Windows ® Vista/XP Service Pack 2
˚
; doing so might damage