Operation And Settings Via The App; Linking Of The Remote Controls; Remote Control Linking And Self-Calibration - Roca In-Wash Insignia A803104001 Bedienungsanleitung

After the cleaning process with water, the In-Wash Insignia will make an hygenization process
by means of an UVC light. The UVC process is always done with the lid closed to protect the
user.
The functions may only be activated when the cover is open and the device detects a user.
See Fig. 2
It is possible to modify the pre-set standard values, customising them to suit the customer´s
needs. See section 3.4.1
When pressing any button of the remote control, the leds are activated, informing us of the
active function and the settings that have been selected.
The leds switch off 5 seconds after showing that information.
▌

2.3 OPERATION AND SETTINGS VIA THE APP

The In-Wash Insignia can also be used and set through the APP. To download it, visit the Roca
website, your device's app store or scan the QR code below:
▌

2.4 LINKING OF THE REMOTE CONTROLS

If the controls need to be linked again (due to the proximity of another appliance in a
neighbouring room, replacement of the control, etc.), they must be linked separately (remote
and flush remote control).

2.4.1 REMOTE CONTROL LINKING AND SELF-CALIBRATION

When carried out this process, all previously modified values will be deleted and the In-Wash
Insignia will have its factory default settings (see section 3.5).
1
5 s.
2
10 s.
3
34
3