Safety Precautions - Crosby IP IPBHZ Bedienungsanleitung

USER MANUAL
For clamp types:
EN
04
© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way
whatever, be replicated or published without prior written permission from The Crosby Group LLC.
1. General
You have chosen a CrosbyIP lifting clamp.
CrosbyIP lifting clamps are the most reliable lifting clamps available. But using reliable tools does
not automatically mean that practices are reliable. The people who work with clamps play an
equally important role in reliable lifting. Ensure that everyone who works with CrosbyIP lifting
clamps has been instructed in the proper application of the clamps.
CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP lifting clamps in optimum
condition and keep warranty, regular maintenance is important. Preventive maintenance and repair
shall be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty pro-
gramme and for more details on maintenance procedures, please consult www.thecrosbygroup.
Check when
com/resources/crosbyip-10-year-guarantee for more information.
placing the
clamp that slings
Please read and understand these instructions before using the lifting clamp.
are not twisted.
It is not 2.

Safety precautions

permitted to stay
in the danger
„ Proper instruction for the personnel is of vital importance. This will contribute to maximum
zone of the load.
reliability in the working environment.
„ IPBHZ - IPHGZ - IPHGUZ clamps may be applied per piece, per set, per 4 clamps for the
No changes may
horizontal transport of steel plates, beams or constructed work.
be made to
„ Ensure that each clamp receives its proportionate share of the load. When using two clamps
CrosbyIP
or more, a spreader beam is recommended.
clamps. Never
„ Hardness: With the standard clamps it is possible to lift steel with a surface hardness of 363
straighten,
HV10. For harder steel types contact your CrosbyIP Customer Service Centre.
attempt to bend
„ Contact your CrosbyIP Customer Service Centre before using this clamp for plates and
or heat treat
constructions that have a radius.
parts.
„ Temperature: the operating temperature is between -40 ºC (-40 ºF) and 100 ºC (212 ºF). For
other temperatures contact your CrosbyIP Customer Service Centre.
Clamps suited
„ There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline,
for stainless
acid, alkaline).
steel, must be
„ Loads: For proper application of the clamp consult the load diagrams 1.
used only for
„ Ensure that all attachments between lifting eye and crane are properly fitted, secured and
handling
coupled.
stainless steel,
„ Several plates may be transported or lifted per lift, only if the plates will not sag.
to avoid contact
„ IPBHZ - IPHGZ - IPHGUZ lifting clamps may be used for sagging, bended or joggled plates,
corrosion.
however in that case no more than one at the time.
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.
IPBHZ - IPHGZ - IPHGUZ
Horizontal lifting with pretension