Rotary Hammer - Worcraft RH15-32X Gebrauchsanweisung

ROTARY HAMMER

IINTENDED USE
● This tool is intended for hammer drilling in concrete, brick and stone; for drilling in wood, metal and plastic as well as for
screwdriving (specifi c accessories should be used)
● The hammering system in this tool outperforms any traditional ratcheting drill when drilling in concrete.
● This tool is designed for use in combination with all standard SDS+ accessories
TECHNICAL SPECIFICATIONS
Type / model
Voltage
Input power
Rotation speed
Impact frequency
Impact energy
Max. drill in wood
Max. drill in concrete
Max. drill in steel
Chuck
Sound pressure level
Sound power level
Vibration (hammer drilling)
Vibration (chiselling)
Vibration (no load)
Vibration
Weight
NOISE/VIBRATION INFORMATION
●
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Read the manual.
Wear eye protection
Comformed with EU standard
Electrical
disposed of with the domestic waste.
PRODUCT ELEMENTS (Fig.1)
1 On/off switch
2 Grase feed port
3 SDS chuck sleeve
4 Auxiliary handle
5 Front function shift knob
6 Rear function shift knob
7 Speed adjustment wheel
8 Power indicator
RH15-32X / C3203T
220-240V~, 50Hz
1500W
0-950/min
0-4300/min
4J
Ø40mm
Ø32mm
Ø13mm
SDS plus
Lp :87,2dB(A), K=3dB(A)
A
L :101,2dB(A), K=3dB(A)
wA
a =17,096m/s
h,HD
a =23,413m/s
h,CH
a =8,526m/s
h,NL
a =21,286m/s
h,CHeq
5.1kg
appliances must not
2 2
,K=1.5m/s
2 2
,K=1.5m/s
2 2
,K=1.5m/s
2, 2
,K=1,5m/s
Disassemble the battery pack before maintenance.
Wear ear protection.
Wear breathing protection
Class II insulation
be
9 Extra carbone brush
10 Spanner
11 Extra gear grease
12 12mm concrete drill
13 10mm concrete drill
14 8mm concrete drill
15 Flat head chisel
16 Point head chisel