Werbung
ROTARY HAMMER
IINTENDED USE
● This tool is intended for hammer drilling or chiseling in concrete, brick and stone; not for drilling in wood, metal and plastic as
well as for screwdriving.
● The hammering system in this tool outperforms any traditional ratcheting drill when drilling in concrete.
● This tool is designed for use in combination with all standard SDS max accessories
● This tool usually used in dusty environment, so it need to regularly maintenance by cleaning dust, feed grease on top of
cylinder or replace carbon brush if needed.
TECHNICAL SPECIFICATIONS
Type / model
Voltage
Input power
Rotation speed
Impact frequency
Impact energy
Max. drill in wood
Max. drill in concrete
Max. drill in steel
Chuck
Sound pressure level
Sound power level
Vibration (hammer drilling)
Vibration (chiselling)
Weight
NOISE/VIBRATION INFORMATION
●
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Read the manual.
Wear eye protection
Comformed with EU standard
Electrical
disposed of with the domestic waste.
PRODUCT ELEMENTS (Fig.1)
1
On/off switch
2
Grease feed port
3
SDS chuck sleeve
4
Auxiliary handle
5
Function shift knob
6
Carbon brush cap
SAFETY
RH15-40X / C4002
220-240V~, 50Hz
1500W
590/min
4000/min
10J
Ø40mm
Ø40mm
Ø16mm
SDS max
Lp
:88,6dB(A), K=3dB(A)
A
L
:102,6dB(A), K=3dB(A)
wA
a
=14,776m/s
h,HD
a
=15,955m/s
h,CHeq
7.4kg
appliances
must
not
2
2
,K=1.5m/s
2,
2
,K=1,5m/s
Disassemble the battery pack before maintenance.
Wear ear protection.
Wear breathing protection
Class II insulation
be
7
Extra carbon brush
8
Spanner
9
Extra gear grease
10
Concrete drill
11
Point chisel
Werbung
