Tight-End Bridge / Tight-End R Bridge (For 6-String And 7-String) - Ibanez Prestige-Serie Bedienungsanleitung

Tight-End bridge / Tight-End R bridge
(for 6-string and 7-string)
■
Tight-End bridge
Intonation adjustment bolt
String height adjustment screw
Adjusting the action
1.
Use an Allen wrench (2 mm) to loosen the saddle lock
bolts.
2.
To adjust the saddle height, use the Allen wrench
(2 mm) to turn the saddle height adjustment screws.
※ When you've fi nished making adjustments, tighten the saddle
lock bolts.
Adjusting the intonation
1.
Use an Allen wrench (2 mm) to loosen the saddle lock
bolts.
2.
Use a Phillips screwdriver to adjust the saddle position
by turning the intonation adjustment bolt.
3.
Use an Allen wrench (2 mm) to tighten the saddle lock
bolts, and use a Phillips screwdriver to lightly tighten
the intonation adjustment screw in the clockwise
direction. (Tighten lightly, so as not to affect the saddle position.)
※
Make sure that the guitar is tuned correctly before you check the intonation.
String replacement
To install a new string, pass it through the string stopper ferrule from the back of the guitar body.
60
All manuals and user guides at all-guides.com
■
Saddle lock bolt
Tight-End R bridge
Intonation adjustment bolt
String height adjustment screw
Saddle lock bolt