Philips HQ 7890CC Bedienungsanleitung Seite 17

Problem
The shaver is
not entirely
clean after I
clean it in the
Jet Clean system.
The Jet Clean
system does
not work when
I press the on/
off button.
Solution
The cleaning fluid in the cleaning chamber may be
soiled. Empty and rinse the cleaning chamber.
The cleaning fluid level may be too low. If the fluid
volume in the cleaning chamber drops below the
minimum level during the cleaning program, the
program aborts. The cleaning light flashes with
intervals and the holder returns to its star ting
position. Refill the cleaning chamber with cleaning
fluid up to the MAX indication
(see chapter 'Cleaning and maintenance').
You may have used another cleaning fluid than the
original Philips cleaning fluid. Only use Philips HQ200
Cleaning Fluid.
The Jet Clean system may not be connected to the
mains. Put the appliance plug in the Jet Clean system
and put the adapter in the wall socket.
You have not placed the shaver in the Jet Clean system
properly. Make sure you push down the lever
completely to lock the shaver into place.
EnglisH
17