Reflection Of The Background Temperature; Fading The Image; Hot/Cold Marks; Recording And Saving Images - TESTBOY TV 292 Bedienungsanleitung

Reflection of the Background Temperature

The background temperature can be set at between 0 °C and 36 °C. Compensation of the reflected background
temperature is set on the display using the background settings. If the objects are very hot or cold, the apparent
temperature and measurement accuracy of the objective or object can be impaired, in particular if there is a low
degree of emission at the surface. By setting the reflected background temperature, in many cases, the
temperature measurement can be improved.

Fading the Image

By cross-fading an infra-red heatmap with an appropriately aligned visual image, heatmaps can be presented
clearer. With each heatmap, the camera also makes a normal recording of the image of the object, so that the
target object can be exactly and better compared to others.
Using the buttons
or completely be superimposed by the heatmap (in increments of 25%).

Hot/Cold Marks

Using the , call up the main menu and then, using
Subsequently, press the button
If this function is activated, hot and cold locations are indicated that, as necessary, should be again investigated
more precise. If the function is not activated, the user can concentrate on the individual measurement pixels.

Recording and Saving Images

In measuring mode, press on the trigger. You are subsequently asked whether the photos should be saved or not.
In order to save the image, press
If the text "NO SD" is indicated at the bottom left on the display, that indicates no SD-card is inserted. If the text
FULL appears at the bottom left on the display, it indicates that the SD-card is already full.
®
Testboy TV 292
and , it is possible to set whether the normal image recording should not, partly,
and activate the hot/cold marks using
, or , in order to discard the image recorded.
, call up the option hot and cold marks ( ).
.
Operation
21