Power Failure - SCANCOOL DKS 122 BE Bedienungsanleitung

dry. Reconnect to the mains supply
with the temperature control at
"MAX", then follow the directions 'To
operate' and 'Tips for refrigeration'
opposite).
Cleaning
• Unplug your Refrigerator.
• Sponge the interior with warm water
and neutral detergent.
• Dry all surfaces thoroughly.
Note: Do not use abrasive cleaners! Do
not use sharp objects!
To ensure efficient operation the back
and bottom of the cooler should be
cleaned thoroughly. Use mild soapy water
to clean the door seal.
Moving your Refrigerator
• Unplug the appliance
• Removeall items inside
Note: Never hold the appliance by the
door.
• Keep level and upright.

Power Failure

If a power cut occurs, do not open the
door more often than necessary in order
to conserve cold air.
TROUBLE SHOOTING
Before returning your Refrigerator to
the store, check the following points; you
may be able to solve any problem yourself.
Not cooling
• Check power cable is connected and
fuse is intact.
• Wrong temperature selected.
• Adjust setting on controller to posi-
tion shown
• Cooler is overfilled.
• Appliance exposed to direct sunlight
or a heat source.
• Door is opened too often.
• The frost layer is too thick.
• Needs to be defrosted
Unusual noises or noisy opera-
tion
• Appliance is not on a level, firm sur-
face or may be touching other items.
Note: It is normal to hear refrigerant
flowing as the compressor stops and
starts.
Outer surfaces are wet
• Water source or leak too near the
appliance – dry surfaces thoroughly
and move the appliance.
Inner surfaces are wet
• Door opened too often or kept open
too often.
LED
• Lamp type: LED-light.
• Energy efficiency level: G
• Light source in this product is replace-
able only by a professional