Alarm; Setting The Alarm Time; Being Awakened; Auto-Stop Function - ADE CK 1940 Bedienungsanleitung

Alarm

Setting the alarm time

1. Press and hold the ALARM button until the
alarm hour flashes in the display and "AL" is
displayed.
2. Use
3. Press ALARM.
4. Use
5. Press ALARM to save the alarm time.
6. Press ALARM again.
The display shows , the alarm function is
activated.

Being awakened

At the set time you will be woken by an alarm
signal, which will become more intense as the
waking time increases.
Interrupting the alarm for 24 hours
− Press any button (except SNOOZE/LIGHT) to
interrupt the alarm. After 24 hours, the alarm
will be triggered again.

Auto-stop function

If you do not press a button, the alarm switches off
automatically after 2 minutes.
After 24 hours, the alarm will be triggered again.
DCF Radio-controlled alarm clock CK 1940
or to set the alarm hour.
or to set the alarm minute.
39