Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
INSTALLATION AND USER MANUAL
• COMFORT AND NIGHT MODE
•
"Comfort" temperature: is the temperature used for the "Chrono" and "Comfort" modes.
•
"Night" temperature: is the temperature used for the "Night" and "Timer" modes.
You can set the desired "Comfort" temperature in the "Comfort" mode by pressing the [+] and [-]
You can set the desired "Night" temperature in the "Night" mode by pressing the [+] and [-] buttons.
IMPORTANT! The "Night" temperature must be lower than the "Comfort" temperature. For this rea-
son the "Night" temperature can be set to a value between 7 °C and the one set for "Comfort" minus
0.5 °C. The "Comfort" temperature can be set in the range of 32 °C and the "Night" temperature +
0.5 °C.
Press the [Prog] button to select the desired mode of operation. An icon on the screen indicates
which mode of operation is selected, according to the following table:
• COMFORT MODE
The "Comfort" mode keeps the temperature stable at a selected value. Select this mode as normal
•
Press the [Prog] button until the "Comfort" mode is displayed.
•
• NIGHT MODE
gested to establish this mode of operation during a night or when a room is not occupied for more
than 2 hours.
•
Press [Prog] button until "Night" mode is displayed.
•
• ANTIFREEZE MODE
The "Antifreeze" mode sets temperature to 7 °C. The device activates the heating element when the
room temperature falls below 7 °C. It is recommended to set this mode of operation when a room
is not occupied for several days.
•
Press [Prog] button until "Anti-freeze" mode is displayed.
• TIMER MODE 2H
This mode can be used to quickly attack the room or to accelerate the dryness of the day.
•
P
The user can move to another mode of operation at any time by simply pressing [Prog].
• CHRONO MODE
for each hour and every day of the week.
At "Comfort" and "Night" temperatures, the related time intervals can be programmed in the fo-
llowing way:
To activate this function, press [Prog] button until "Chrono" button appears.
•
Enter "Stand-by" mode and press [-] at least for 3 seconds.
8
-
-
-
Werbung
Inhaltsverzeichnis
