Aux In 1 Mode; Operation; Setup Menu - Sonoro PRESTIGE SO-330 Bedienungsanleitung

13. AUX In 1 mode

13.1

Operation

Your external player (e.g. Blu-ray player) must be connected to the auxiliary
input jack 1 of PRESTIGE with an audio cable (with RCA connector, not
supplied).
To access the AUX In
1 mode,
To start and control
playback,
To mute or restore
the sound output,
13.2

Setup menu

Press SETUP in the AUX In 1 mode to access the setup menu (see chapter "Using
the menus"). The following options are available and the current settings (if
applicable) are marked with an asterisk (*).
[Bluetooth headphone]
•
To connect or disconnect with a Bluetooth headphone, see chapter "Basic
operation".
[System Settings]
•
See chapter "System Settings".
[Main menu]
•
To access other playback modes, alarm or sleep timer.
94
Press key on remote control to toggle
AUX In. 1 mode.
Or, press MENU once, then
(or rotate the navigation knob) to select the
AUX In 1 mode and then press OK to confirm.
Perform all playback operations on the
external player.
Press or button.
or .
© sonoro audio GmbH 2019