Flash Mode - M Manual Flash; Flash Mode - Multi Stroboscopic Flash - Walimex Pro Stager Gebrauchsanleitung

13. Flash Mode – M Manual Mode
When use flash in manual mode, output
power of studio flash is adjustable from 1/1 to
1/128 with 1/3 f-stop increment.
1. Set flash mode <M>
Shortly press [MODE] button, flash mode
set as <M>.
2. Set flash output power
Rotate [regulator] to adjust flash output
power.
14. Flash Mode –
Multi Stroboscopic Flash
According to one shutter signal, the flash will
generate a series of fast flashes, and multiply
images will be integrated in one picture. It is
useful to capture trajectory of a moving ob-
ject. You can set output power of flash light,
flash frequency and number of flashes. Maxi-
mum number of flashes is 20 and maximum
flash frequency is 20Hz.
1. Set Flash Mode <Multi>
Shortly press [MODE] button, the flash will
set as <Multi>.
2. Set Flash Output
Rotate [regulator] to set flash output
power.
3. Set number of flashes
Shortly press [regulator], number of flas-
hes parameter blinks. Rotate [regulator]
to set number of flashes (1-20).
4. Set flash frequency
Shortly press [regulator] twice, flash
frequency "Hz" blinks. Rotate [regulator] to
set flash frequency (1-30).
34