Operating Modeling Lamp; Flash Modes; Set Flash Mode; Flash Mode-M Manual Flash - Walimex Pro Mover 200 TTL Gebrauchsanleitung

2. 2.4G wireless radio trigger
Use 22709 Walimex pro Operator TTL T-S
for Sony cameras, the 21969 Walimex pro
Operator TTL T-N for Nikon cameras or the
21968 Walimex pro Operator TTL T-C for
Canon cameras transmitter to trigger Mover
200 TTL flash light synchronously.
Supporting flash mode: <TTL>,<M>,<Multi>

12. Operating Modeling Lamp

Shortly press Modeling Lamp button, bright-
ness of modeling lamp varies from 1, 2, 3, 4,
5, 6 and "OFF" in sequence.

13. Set Flash Mode

13.1. Set Flash Mode
Shortly press [MODE] button to select TTL
auto flash M manual flash and Multi strobo-
scopic flash in sequence.

13.2. Flash Mode-M Manual Flash

When use flash in manual mode, flash output
power is adjustable from 1/1 to 1/256 with 1/3
f-stop increment.

13.3 Flash Mode-Multi Stroboscopic Flash

According to one shutter signal, the flash will
generate a series of fast flashes, and multiply
images will be integrated in one picture. It
is useful to capture trajectory of a moving
object. You can set flash output power, flash
frequency and number of flashes. Maximum
number of flashes is 20 and maximum flash
frequency is 30 Hz.
36