ECG FORZA 8000 Pour Over Nero Bedienungsanleitung Seite 6

the age of 8 must keep away from the appliance and the power
supply.
Make sure that the kettle stands on an even surface to prevent tipping
over and causing injury while cooking. During the operation, and also
right after cooking, do not touch the outer surface of the kettle or the
lid, the outer surfaces are hot. Do not use the appliance close to objects
which can be damaged by steam.
DANGER for children: Children may not play with the packaging
material. Do not let children play with the plastic bags. Risk of
suffocation.
WARNING:
1. Always use cold water when filling the kettle.
2. The water level must be between the MAX. and MIN. levels! Hot
water may spurt out if the kettle is overfilled.
3. Switch off the kettle before removing it from the base.
4. Always make sure the lid is well closed.
5. The base and kettle body should not be wet.
6. Only use the kettle in combination with its original base.
7. Do not turn on the kettle if it is empty.
USING THE APPLIANCE
Before first use, remove and wash the kettle with an ordinary detergent used for washing dishes. Then rinse
with lukewarm water. Fill the kettle with clean, cold and potable water up to max. level before first use, switch it
on and bring the water to a boil. Then pour the water out and repeat the procedure at least five times. With this
procedure you will properly clean the kettle and remove any possible after-taste. If you have the impression
that you taste plastic from the boiled water, we recommend to repeat the procedure. It is also recommended
the leave the empty kettle open for 24 hours. The kettle material coming into contact with water is certified
as harmless to health. Any slight "smell" or "after-taste" during initial use after unpacking kettle is a normal
phenomenon and should not be cause for return of the appliance.
Basic operation
1. Place the base on a dry, smooth and level surface and insert the plug into the socket.
2. After connecting the power supply, place the kettle on the base. The "ON/OFF" button
lights up and the display shows the current temperature.
3. Open the lid and fill the kettle with water, at least to the "MIN" mark. Then close the lid
to prevent steam from escaping and causing injury.
4. Press the "ON/OFF" button, the indicator will light up. Press the "BOIL" button and the
water will start boiling at 100 °C.
6
Do not immerse in water!