Inhaltsverzeichnis
Werbung
Wall Mounting
Carefully choose a position for mounting the heater on the wall. Do not mount it in
front or below a power socket. Do not mount it below a shelf, curtains or any other
obstruction. Refer to the safety notes as well.
1. Attach one left angle bracket
and one right angle bracket
(D) on the wall observing a
distance of 38.5 cm and a
minimum height of 40 cm
(figure 1). Use the supplied
screws (B) and dowels (C) for
fastening the brackets or use
other screws and dowels for
the appropriate surface.
2. Unscrew the stand support (3) from the unit.
Screw on the two remaining angle brackets
(D) instead (figure 2). Those serve as distance
pieces.
3. Hang
the convector
carefully on the brackets in order to avoid
scratches on the back panel (figure 3).
Operation
heater
slowly and
18
38.5 cm
1
2
3
Werbung
Inhaltsverzeichnis
