Technical Data; Before Starting The Equipment - EINHELL 45.100.34 Originalbetriebsanleitung

ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................... 18 V DC
Idling speed: .....................................0-2300 min
Blow rate: .........................................0-2900 min
Clockwise/counter-clockwise: ........................Yes
Bit mount: ................................... 1/4 " (6.35 mm)
Weight: .......................................................1.2 kg
he
Danger!
g
Sound and vibration
ll
Sound and vibration values were measured in
ing accordance with EN 62841.
p- L sound pressure level ................... 77.19 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 88.19 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
r
The impact of noise can cause damage to hea-
ring.
l
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
e
Screwing without hammer action
ic
Vibration emission value a
r of
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
for
an initial assessment of exposure.
Warning:
-
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
e
ding on the way in which the power tool is used,
nju-
especially the type of workpiece it is used for.
Anl_TE_CI_18_1_Li_SPK13.indb 15 Anl_TE_CI_18_1_Li_SPK13.indb 15
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
-1
Residual risks
-1
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
Limit the operating time.
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).

5. Before starting the equipment

= 1.089 m/s
2
Be sure to read the following information before
h
2
you put the cordless screwdriver into operation:
1. Only ever use screwdriver bits which are
suitable for the purpose and in faultless con-
dition.
2. Before you begin to screw in walls and ma-
sonry, check for concealed electric wiring,
gas pipes and water pipes.
- 15 -
28.07.2022 09:16:02 28.07.2022 09:16:02