Filling The Water Tank - Philips GC9600 range Benutzerhandbuch

Filling the water tank

Fill the water tank before every use or when the 'water tank empty' light
flashes. You can refill the water tank at any time during use.
1 Remove the water tank from the appliance and fill it with tap
water up to the MAX indication.
2 Put the water tank back into the appliance by fitting the bottom
part into the appliance first.
3 Push in the top part of the water tank until it locks into place
('click').
'Water tank empty' light
When the water tank is almost empty, the 'water tank empty' light flashes.
Fill the water tank and press the steam trigger to let the appliance heat up
again. When the 'iron ready' light lights up continuously, you can continue
steam ironing.
Optimal Temp Technology
The Optimal Temp Technology enables you to iron all types of ironable
fabrics, in any order, without adjusting the iron temperature setting.
Fabrics with these symbols are ironable, for example linen, cotton,
polyester, silk, wool, viscose and rayon.
Fabrics with this symbol are not ironable. These fabrics include synthetic
fabrics such as Spandex or elastane, Spandex-mixed fabrics and polyolefins
(e.g. polypropylene), but also prints on garments.
ENGLISH
7