Wall Mounting - Bosch GAL 18V-20 Professional Originalbetriebsanleitung

8 | English
Charger
Battery charging voltage
(automatic voltage detec-
tion)
Charge current
Permitted charging temper-
ature range
Charge time at battery capa-
city, approx.
– 1.5 Ah
– 2.0 Ah
– 3.0 Ah
– 4.0 Ah
– 5.0 Ah
– 6.0 Ah
– 8.0 Ah
Number of battery cells
Weight according to
EPTA-Procedure 01:2014
Protection class
A) not valid for article number 2 607 226 289
Operation
Start-up
Note the mains voltage! The voltage of the power source
u
must match the voltage specified on the rating plate of
the charger. Chargers marked with 230 V can also be op-
erated with 220 V.
Charging process
The charging process begins as soon as the mains plug for
the charger is inserted into the mains socket and the battery
(1) is inserted into the charging slot (2).
Thanks to the intelligent charging process, the charge condi-
tion of the battery is automatically detected and then
charged up with the optimal charge current depending on
battery temperature and voltage.
In this way, the battery is treated with care and remains per-
manently fully charged when it is stored in the charger.
What the display elements mean
Flashing green battery charge level indicator (3)
The rapid-charging procedure is indicated by
flashing of the green battery charge level in-
dicator (3). The battery can be removed at any
time and used.
Note: The charging process is only possible when the tem-
perature of the battery is within the permitted charging tem-
perature range, see section "Technical data".
1 609 92A 4W1 | (11.02.2019)
Continuously illuminated green battery charge level
GAL 18V-20
indicator (3)
V 10.8–18
A 2.0
°
C 0–45
ure range, and cannot be charged for this reason. The bat-
tery is charged as soon as the permitted charging temperat-
ure range is reached.
(80%) / 100%
When the battery is not inserted, continuous lighting of the
battery charge indicator (3) indicates that the mains plug is
min (35) / 50
inserted in the socket and that the battery charger is ready
min (50) / 65
for operation.
min (70) / 95

Wall mounting

min (96) / 125
The charger can be used either free-standing (for use on a
min (120) / 155
desktop) or mounted on the wall.
min (145) / 185
When affixing to the wall: Drill two holes, leaving a clearance
min (191) / 245
as specified in the image.
To secure it, use round-head screws with a diameter of 5 mm
3–15
to max. 6.5 mm.
kg 0.37
A)
/ II
Errors – Causes and Corrective Measures
Cause
Battery charge indicator (3) stays lit
Charging not possible
Battery temperature is out of
charging range
The battery is not connected
(correctly)
Battery contacts are dirty
Battery defective
Battery charge indicator (3) does not light up
Continuous lighting of the battery charge in-
dicator (3) indicates that the battery is fully
charged or that the temperature of the battery
is not within the permitted charging temperat-
72 mm
Corrective measures
Please wait until the permit-
ted temperature range is
reached
Connect battery to charger
correctly
Clean the battery contacts;
e.g. by connecting and dis-
connecting the battery sev-
eral times. Replace battery if
necessary
Replace the battery
Bosch Power Tools