Shutoff Delay; Filter Saturation Alarm; Alarm Messages - Franke GALAXY PLUS INOX - FGPL 1200 Bedienungsanleitung

EN

Shutoff delay

This function allows you to temporarily continue
filtering and extracting residual smoke after the
cooking has stopped.
Switching on
Briefly press.
X
Activates motor shutoff deferred by 30
„
minutes.
Display: Alternately displays the speed of the
„
extraction motor and the time remaining until
motor shutoff. The point at the bottom to the
right flashes.
Switching off
Briefly press.
X
 Turns the off the „delayed stop" function
„

Filter saturation alarm

The alarm tells you when the grease filters and the
odour filters need to be cleaned or replaced (for the
non-washable odour filters).
Activating the alarm „filter saturation"
Depending on the type of control keyboard, the
„Filter saturation" alarm may need to be activated if
your appliance is a recycling
or clean-air type.
Activation of the filter saturation alarm
Long press.
i
Activates the "filter saturation alarm" function.
„
Display: displays HR. blinking 3 times.
„
Deactivation of the „filter saturation" alarm
Long press.
i
Deactivates the "filter saturation alarm"
„
function.
Display: displays HR. blinking 1 time.
„
Resetting the alarm „filter saturation"
Briefly press.
X
24
 Resets the filter alarm once triggered.
„
F
FGPL 1000/1200 /1400

Alarm messages

Display: Displays «FF» which signals the need
„
to wash the grease filters every 100 hours of
operation.
Display: Displays «FC» which signals the need
„
to wash the grease filters and replace or wash
the odour filters (according to their type), every
200 hours of operation.
These «FC and FF» signals are only visible
„
when the motor and the lighting are off.
– 16 –