Balluff BMF 203K-H-PI-C-A8-SA2-P0-S49W Serie Montageanleitung Seite 4

BMF 203K-H-PI-C-A8-SA2-P0-S49W- _ _
Magnetic Field Sensors
The CE symbol confirms that our products
comply with the requirements of the current
EU directive.
About this guide
This manual provides all necessary information for the safe
use of the BMF Magnetic Field Sensor. It applies to the
following models:
– BMF 203K-H-PI-C-A8-SA2-P0-S49W- _ _
Order code: BMF00PE
Read this guide and the other applicable documents
completely before installing and operating the product.
Intended use
The Magnetic Field Sensor is intended for use in pneuma-
tic cylinders and grippers having C-slots in the industrial
sector.
Proper function according to the information in the
technical data is only guaranteed if the product is used
solely as described in the user's guide and the associated
documents as well as in compliance with the technical
specifications and requirements and only with a suitable
original Balluff accessory.
Otherwise, it is deemed non-intended use. Non-intended
use is not permitted and will result in the loss of warranty
and liability claims against the manufacturer.
Reasonably foreseeable misuse
The product is not intended for the following applications
and areas and may not be used there:
– In safety-oriented applications in which personal safety
depends on the device function
– In explosive atmospheres
– In food applications
Dimensions
Sensor
20
Active surface
1 english
Control element
200 35
Teach-in button
yellow LED
orange LED
green LED
Other applicable documents
A comprehensive standard user's guide and additional
information about this product can be found at
www.balluff.com on the product page.
SA2: Deviation from standard
– S49W Connector
– different pin assignment
– only 1 switching output
General safety notes
Activities such as installation, connection and startup
may only be carried out by qualified personnel.
Qualified personnel are persons whose technical trai-
ning, knowledge and experience as well as knowledge of
the relevant regulations allow them to assess the work
assigned to them, recognize possible hazards and take
appropriate safety measures.
The operator is responsible for ensuring that local safety
regulations are observed.
In particular, the operator must take steps to ensure that a
defect in the product will not result in hazards to persons
or equipment.
The product must not be opened, modified or changed. In
case of defects and non-repairable malfunctions of the
product, it must be taken out of operation and secured
against unauthorized use.
Connection
L 27
M8x1
Ø 10