Harmony 380/380 Se System; Harmony 380 Operation & Care; Calibrating The Harmony; Se System - NuVinci Harmony 330 Anleitung

3. Harmony 380/380 operation & care
SE
3.1 Harmony 380/380 System
SE
•
The Harmony 380/380 system is
SE
compatible with NuVinci Optimized N360
and N380/380 series CVPs (but is
SE
incompatible with the NuVinci Optimized
N330/N330f CVP).
•
The Harmony 380/380 system utilizes
SE
the Harmony H8 controller, which offers
both fully automatic and manual shifting
options. The rider switches between
"automatic" and "manual" modes by
pressing the "mode" button (A) on the H8
Controller housing.
•
In automatic mode, Harmony 380/380
automatically adjusts ratio to maintain
the rider's preferred cadence. The rider
can choose their ideal cadence setting
by rotating the grip. The blue LED "RPM"
display indicates the cadence setting (B).
•
In manual mode, the rider is able to
shift on their own with "ride by wire"
technology. Like the cable-shift system,
the steeper the orange "hill" on the
LED display (C), the easier the ratio for
climbing.
The NuVinci Optimized CVP cannot

!
be shifted completely through the
ratio range when stationary. The
Harmony system will intelligently wait for
pedaling or wheel movement if wide ratio
ranges are commanded while stationary.
TECHNICAL OWNER MANUAL

3.2 Calibrating the Harmony 380/380

System
If the Harmony system has been reinstalled, or
if system operation is inconsistent or incorrect,
your Harmony 380/380 system may need
SE
to be calibrated.
To do this:
1. Turn system power on.
2. Pedal the bicycle lightly through the entire
calibration procedure (preferably on a
stand with the rear wheel off the ground).
3. On the Harmony H8 controller, press and
SE
hold the "mode" button (A) until the rear
hub begins shifting (5-7 seconds typically),
then release the button.
4. Continue pedaling lightly while the system
shifts from "low" to "high" ratio multiple
times and completes calibration.
SE
Mode button
Automatic shift mode
Faster pedal
cadence
setting
Slower pedal cadence settig
Manual shift mode
Easier ratio
for climbing
Faster ratio for speed
HARMONY 380 OPERATION & CARE
A
B
C
EN
5