Cleaning & Lubrication; Wear Parts & Repair Work - NuVinci Harmony 330 Anleitung

5.3 Cleaning & Lubrication
•
Your NuVinci Optimized components are
sealed and well protected from the external
environment. However, do not use water
under pressure (such as pressure washers
or water jets) for cleaning to prevent
malfunctions due to water penetration.
•
During the winter, you should clean your
bicycle in shorter intervals so that winter
road salt cannot cause any damage.
•
Do not use aggressive cleaners
•
The NuVinci Optimized CVP is provided
with permanent lubrication and the CVP
internals are maintenance-free for the life
of the product.
•
The NuVinci Optimized CVP internal
freewheel mechanism is serviceable.
•
Regular lubrication will extend the chain's
service life.
TECHNICAL OWNER MANUAL
5.4 Wear Parts & Repair Work
•
Handlebar grips, sprockets, and bike
chains are wear parts. Please check
these parts regularly and replace them as
necessary.
•
Only a qualified bike dealer should
perform any necessary work on the
NuVinci Optimized CVP, Nfinity shift
system, or Harmony shift system.
•
Unauthorized work on your NuVinci
Optimized CVP, Nfinity shift system, or
Harmony shift system could endanger you,
and your warranty may become void.
•
Please contact your qualified bike dealer
regarding any questions or problem you
may have.
•
Refer to our website for additional service
information at
www.nuvincicycling.com/service
HARMONY GENERAL CARE
EN
10