Harmony Technical Data; Cvp Specifications - NuVinci Harmony 330 Anleitung

8. Harmony technical data

8.1 CVP Specifications

Harmony 330
Hub N330/N330f
Hub colors Silver or black
Speed ratio Infinitely variable within ratio range
Ratio range 330% nominal, 0.5 underdrive to 1.65 overdrive
Controller H3
Other compatible controller –
Shifting Variable twist grip, ¾ turn
Hub Interface HHI3
Other compatible HI's –
Spoke configurations 32 or 36 hole
Brake configurations Disc, rim, or roller
CVP weight 2450 grams
Drop-out width 135mm, horizontal or vertical
Axle length 183mm
Axle threads M10 x 1
Chainline 49.0 ± 0.5mm
Beltline (Gates) 45.5 ± 0.5 mm
Beltline (Conti-Tech) 46.2 ± 0.5 mm
Sprocket sizes 16-22 tooth (chain)
20-28 tooth (belt)
Sprocket type Standard 9-spline, flat on one side
Sprocket ratio definition Front sprocket teeth / Rear sprocket teeth
Sprocket ratio minimum (Pedal bikes)
Sprocket ratio minimum (Front motor e-Bikes)
Sprocket ratio minimum (Mid motor e-Bikes)
Spoke flange diameter
Center to left spoke flange
Center to right spoke flange
TECHNICAL OWNER MANUAL
Harmony 380/380
Hub
Hub colors
Speed ratio
Ratio range
Controller
Other compatible controller
Shifting
Hub Interface
Other compatible HI's
Spoke configurations
Brake configurations
CVP weight
Drop-out width
Axle length
Axle threads
Chainline
Beltline (Gates)
Beltline (Conti-Tech)
Sprocket sizes
Sprocket type
1.8 (Table in section 8.2) Sprocket ratio definition
1.8 (Table in section 8.2) Sprocket ratio minimum (Pedal bikes)
2.1 (Table in section 8.2) Sprocket ratio minimum (Front motor e-Bikes)
125.0 mm Sprocket ratio minimum (Mid motor e-Bikes)
26.0 mm Spoke flange diameter
26.0 mm Center to left spoke flange
Center to right spoke flange
SE
N380/N380
SE
Silver or black
Infinitely variable within ratio range
380% nominal, 0.5 underdrive to 1.9 overdrive
H8
H|Sync
Variable twist grip, ¾ turn
HHI8
H|SYNC, (Harmony Hub Interfaces MY12-15)*
32 or 36 hole
Disc, rim, or roller
2450 grams
135mm, horizontal or vertical
183mm
M10 x 1
49.0 ± 0.5mm
45.5 ± 0.5 mm
46.2 ± 0.5 mm
16-20 tooth (chain)
16-22 tooth (chain)**
20-28 tooth (belt)
Standard 9-spline, flat on one side
Front sprocket teeth / Rear sprocket teeth
1.8 (Table in section 8.2)
1.8 (Table in section 8.2)
2.1 (Table in section 8.2)
125.0 mm
26.0 mm
26.0 mm
HARMONY TECHNICAL DATA
EN
*Harmony Hub Interfaces
MY12-15 are chain
compatible only
**This data refers to all
Harmony Hub Interfaces
MY12-15 which are chain
compatible only
23