EuroLite LED PMB-4 COB QCL 30W Leiste Bedienungsanleitung Seite 28

Automatic mode
In automatic mode, 4 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until Auto program is indicated in the display. Confirm with the
ENTER button. Use the buttons UP and DOWN to select the desired show program (01-04). Confirm
with the ENTER button.
2 Press the MENU button so many times until Set speed is indicated in the display. Confirm with the
ENTER button. Use the buttons UP and DOWN to adjust the running speed of the program from 00
(slow) to 99 (fast). Confirm with the ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until Sound program is indicated in the display. Confirm with the
ENTER button. Use the buttons UP and DOWN to select the desired show program (01-04). Confirm
with the ENTER button.
2 Press the MENU button so many times until Set speed is indicated in the display. Confirm with the
ENTER button. Use the buttons UP and DOWN to adjust the running speed of the program from 00
(slow) to 99 (fast). Confirm with the ENTER button.
3 Press the MENU button so many times until Mic Sensitivity is indicated in the display. Confirm with the
ENTER button. Use the buttons UP and DOWN to Adjust the microphone sensitivity to the volume of the
music (00 = low, 99= high).
4 If you enable the silent scene mode (on setting) in menu item Silent scene, the LEDs will be switched
off if the volume is too low or if there is no sufficient bass beat. If you disable this mode (off setting) the
LEDs remain on during periods without music.
Individual color mix
In the color mode Edit color each of the quadcolor LEDs can be individually adjusted for brightness. The
device will constantly emit the color adjusted.
1 Press the MENU so many times until Edit color is indicated in the display. Confirm with the ENTER
button.
2 Now the display indicates the letter Red:*** for the color and the corresponding brightness value. Use the
buttons UP and DOWN to adjust the desired brightness.
3
Confirm with the ENTER button. Now the color green can be adjusted; then blue and white.
Color temperature
In the Color temperature mode the device will constantly emit white light. The color temperature of the light
beam is adjustable.
1 Press the MENU button so many times until Color temperature is indicated in the display. Confirm with
the ENTER button.
2 Use the buttons UP and DOWN to adjust the desired color temperature (see menu structure). Confirm
with the ENTER button.
Master dimming
Menu Master dimming allows adjusting the total brightness for all stand-alone operating modes.
1 Press the MENU button so many times until Master dimming is indicated in the display. Confirm with the
ENTER button.
2 Use the buttons UP and DOWN to adjust the desired brightness (00 = dark, 99 = bright). Confirm with the
ENTER button.
Fading program
In Fading program the speed for fading can be set.
1 Press the MENU button so many times until Fading program is indicated in the display. Confirm with
the ENTER button.
2 Use the buttons UP and DOWN to adjust the desired speed (00-99). Confirm with the ENTER button.
28/36 00132088, Version 1.1