Sony VPL-EW345 Kurzreferenz Seite 47

Fitting the projected image to the screen (Digital Shrink adjustment)
If the projected image exceeds the size of the screen, you can shrink and adjust the position of it.
1 Select "Rid. digitale" in the Installation menu.
2 Set the shrinking rate.
Press the V/v/B/b key to adjust the value. The more the value increases towards the plus side,
the smaller the projected image becomes.
3 Press the ENTER button to display the shift adjustment menu and adjust the display position of
the projected image.
Press the V/v/B/b key to adjust the display position.
Note
If the shrinking rate is set to "0," you cannot move the image. If the projector is projecting an image
with a resolution that is different from the panel display resolution of this projector, it may not be
possible to move the image.
Projecting an Image
19
GB