Drywall (No Studs) - Startech Fpwtltb1 Installationsanleitung

Hold the Mount in position on the Wall, aligning the
8.
Mounting Holes with the Pilot Holes. Insert and tighten
the included Wall Mounting Screws, using the Electric Drill
with a Phillips Head Bit, a Phillips Head Screwdriver, or a
Ratcheting Socket Wrench with an appropriately sized Hex
Socket.
Note: If the product features keyhole mounting, first secure
the hardware to the wall, then hang the product from the
mounting hardware. Tighten the mounting screws after
hanging the product.
Follow the steps to attach the Equipment to the Mount,
9.
located in the User Manual.

Drywall (No Studs)

Determine the target position of the Mount, factoring in:
1.
Equipment Dimensions
•
Location of the Mounting Holes in the Equipment in
•
relation to the location of the Holes, located in the
Mounting Brackets and how this will impact the final
location of the Equipment
Dimensions and location(s) of any Nearby Object(s)
•
Adequate clearance is factored in for any/all adjustment
•
capabilities of the Mount
Drywall Thickness
•
Mechanical, Electrical, and/or Plumbing Infrastructure
•
Scan the intended Mounting Location for Live Wires, using
2.
a Stud Finder with AC Current Detection. Mark the location
of any live wires, using a Pencil.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5