Atlas KFS 227 Bedienungsanleitung Seite 39

18. Remove the hole cover from the top left side of the cabinet and secures the
cover on the top right side of the cabinet.
Note: Ensure the rubber gaskets are making a good seal with the cabinet
all the way around the doors before tightening the hinge screws.
19. Secure the upper hinge to the top left side of the cabinet with the three
screws you removed previously. Before you tighten the upper hinge
screws, make sure that the top of the door is level with the cabinet and
that the rubber gasket makes a good seal.
20. Install the hinge cover over the hinge on the top left side of the cabinet.