Remote Control Of The Sacd 1250 R - T+A SACD 1250 R Betriebsanleitung

General
The SACD 1250 R can be remote operated with the 
remote controls F6 and F12 or with the system control
F1.
On the following diagrams all buttons used for the control
of the SACD 1250 R are marked '
buttons are without function for the SACD 1250 R.

Remote control of the SACD 1250 R

 '. All other
 
The SACD 1250 R receives remote control commands
from the R –Master device (amplifier or surround-
LINK
receiver). It is switched ON with the
Note:
If there is no master unit present, the SACD 1250 R can
be directly remote operated with the remote control set
(FBS12, FBS6) which is available as an optional
accessory.
34
 
 
button.