Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling - EINHELL TC-BD 630/1 Originalbetriebsanleitung

8. Cleaning, maintenance and
ordering of spare parts
Danger!
Always pull out the mains power plug before star-
ting any cleaning work.
8.1 Cleaning
•
The pillar drill is maintenance-free to a large
extent. Keep the equipment clean. Pull out
the power plug before doing any cleaning and
maintenance work on the equipment. Do not
use any harsh, abrasive solvents for cleaning
purposes. Make sure that no liquid gets into
the equipment. Re-grease all bare parts when
the work is finished. Particularly the drill pillar,
blank parts of the column, and the drill table
should be re-greased at regular intervals. Use
a standard, acid-free lubricating grease for
this purpose.
Note: Do not dispose of oil-soaked rags,
grease-soaked rags, oil residues and grease
residues in your household rubbish. Dispose
of such materials in an environment-friendly
t
way. Check and clean the ventilation holes
regularly. Store the equipment in a dry room.
If the equipment becomes damaged, do not
try to repair it yourself. Leave such repairs to a
qualifi ed electrician.
e
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could at-
tack the plastic parts of the equipment. Ensu-
re that no water can seep into the device. The
ingress of water into an electric tool increases
the risk of an electric shock.
Anl_TC-BD_630-1_SPK13.indb 23 Anl_TC-BD_630-1_SPK13.indb 23
GB
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go to
www.Einhell-Service.com
Tip! For good results we
recommend high-quality ac-
cessories from
www.kwb.eu
welcome@kwb.eu

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature.
The ideal storage temperature is between 5 and
30 °C. Store the electric tool in its original pa-
ckaging.
- 23 -
!
18.01.2023 11:21:38 18.01.2023 11:21:38