HEIDENHAIN TTR ERM 202C Betriebsanleitung Seite 2

3 Information based on the document type, the life-cycle phase of the product, and the
target group
The following documents must be read and observed by the stated target groups before mounting, initial configuration, or disposal
of the encoder.
Freely available documents are available at www.heidenhain.com/documentation.
Further documents are available upon Request.
Document
xpath-0
Operating Instructions
Operating Instructions TTR ERM 202C
xpath-0
Mounting Instructions
Mounting Instructions Grating drum
ERM 202C
xpath-0
Product Information
Product Information ERM 202C –
Modular Angle Encoder with Magnetic
Scanning
xpath-0
Brochure
Interfaces of HEIDENHAIN Encoders
Brochure
Cables and Connectors
Brochure
Modular Angle Encoders With Scale
Drum or Scale Tape
Specification
CAD
Technical support
Measuring systems  +49 8669 31-3104
E-mail: service.ms-support@heidenhain.de
www.heidenhain.de
1376516 · Ver00 · 01
Document ID Life-cycle phase of the product/
Contents
xpath-1 xpath-2
1376516 Operation of the unit
xpath-1 xpath-2
527530 Mounting the product
xpath-1 xpath-2
645915 Specifications
Dimension drawing
xpath-1 xpath-2
1078628 Interfaces and measuring methods
Electrical connection
Interface electronics
1206103 Cables and connectors for signal
transmission between the position
measuring system and the subsequent
electronics
1371806 Technical features, operating conditions,
and mounting information
Specifications, dimension drawing
Accessory
Website Views
Find product ID
Dimensions
XPath XPath XPath
✓ ✓ ✓
XPath XPath XPath
✓ ✓
XPath XPath XPath
✓
XPath XPath XPath
✓
✓
✓
✓ ✓
DR. JOHANNES HEIDENHAIN GmbH
Postfach 1260 · 83292 Traunreut