Wisi COMPACT HEADEND Betriebsanleitung Seite 25

Web Interface
The tab "update" gives the abillity to update the modules software. The software has to suit the type of
module and the hardware version has to match. Modules of the same type ca be programmed simulta-
neously. Select all modules of the same type, select the software on the computer and choose
"program Module". The programming process for all modules is being started.
Extended updates for the MPEG decoder etc. (filename.zli) as well as the NIT table of a module
(filename.nit) can be transferred through the website. A new website can be programmed as well.
The activation code (*. Onl file) for the modules (ex.: to utilize the external Nit) can be transmitted
in the same way.
Select "Websoftware update", choose websoftware (filename.tar) and select "program Module".
Run a firmware update by selecting "OH40A Firmware" > Datei laden > "program Module". OH40A
reboots.
To save the module configuration select the checkboxes for the modules and click "save configuration".
To upload config files to the modules select the file on your PC and click "load configuration".
You do not have to tick the checkboxes. The sequence and type of the modules in the chassis has to
correspond to the sequence of the modules on the update file.
- 25 -