Wisi COMPACT HEADEND Betriebsanleitung Seite 17

Handset OH 41 (Accessory)
W I S I HW
S W
H E A D E N D
Up
Left
Down
Note: After programming
remove the handset from the
connector.
Initializing the modules
- Connect OH 40 A to mains power
- Connect the handset OH 41
- Modules are scanned in the background (can take up to 1 min!)
The description of the menu structures can be found in the related manual of the module.
Standby
Mains connected to basic unit and the mode
V 1 . 0 0
„Initializing the modules"has finished (see next page).
V 1 . 0 0
Plug the handset into the socket
Press the ► key to enter the module menu and system menu.
Modul menu
Module 1 OH77
Right
Module 2 OH85
Module 7 OH88H
Modul menu
Press the ► key
▲▼ keys — Select module 1-7
► key
◄ key
Parameter menu
▲▼ keys
► key
◄ key
Parameter sub-menu
◄► keys
▲▼ keys
- Saving data: Data are saved automatically after leaving the para-
meter menu, or 60 seconds after the last entry.
Parameter menu
DiSEqC
Ÿ Sat-Freq
Ÿ
Ÿ
— Move to parameter menu
— Back.
— Select parameter
— Move to parameter sub-menu
— Back
— Select the digit to be changed
Cursor blinks below the digit, e.g. 1894
If the permissible range is exceeded, the unit
returns to the parameter menu
— Change the value, e.g. change 1894 to 1834
on the basic unit.
Parameter sub-menu
1894
- 17 -