CeraGem CGM EB-1901 Gebrauchsanweisung Seite 17

3. How to use the remote control
Using manual mode
1. Turn on the remote control, check the current status
and press the manual mode button.
2. Move the internal projector to the desired position
using the up/down button.
3. The manual mode will begin at the designated
position. Maintain correct posture.
- The time remaining will be displayed at the top of the human body icon.
- If the remote control is operated while using the product, the time
remaining will be initialized.
- When 5 minutes have passed after setting the position, the internal
projector will move automatically in order to prevent burns.
- When 60 minutes have passed after operating the remote control,
the remote control will turn off automatically and the mode will end.
- When pausing, the internal projector will move down vertically in order
to prevent burns and injury.
(When the mode is executed again, the set strength will be restored.)
- When 5 minutes have passed after pausing, the product will turn off
automatically.
30
Duration for mode Approximately 60 minutes.
3. How to use the remote control
Using manual mode (master mode)
1. Turn on the remote control, check the current status
and press the manual mode button twice.
2. Move the internal projector to the desired position
속도 삭제
using the up/down button.
내장음악 5 / 볼륨 5
- The selected position will be displayed in green.
수동 모드: 번호 T1 표시
강도 3
온도 55
3구도자 / 복부 진동 도자
Position
Neck area(cervical spine)
Back area(thoracic vertebrae)
Waist area(lumbar vertebrae)
3. When body shape sensing ends, the manual master
mode will begin. Maintain correct posture.
- The time remaining will be displayed at the top of the human body icon.
- If the remote control is operated while using the product, the time
remaining will be initialized.
- When 5 minutes have passed after setting the position, the internal
projector will move automatically in order to prevent burns.
- When 60 minutes have passed after operating the remote control,
the remote control will turn off automatically and the mode will end.
- When pausing, the internal projector will move down vertically in order
to prevent burns and injury.
(When the mode is executed again, the set strength will be restored.)
- When 5 minutes have passed after pausing, the product will turn off
automatically.
Duration for mode Approximately 60 minutes.
Screen display (24 segments)
C1~7
T1~12
L1~5
31