Herunterladen Inhalt Inhalt Diese Seite drucken

BOMANN EBO 7909 IX Bedienungsanleitung, Garantie Seite 32

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CAUTION:
• Do not use a wire brush or other sharp, abrasive
items.
• Do not use harsh abrasive cleaners or sharp
metal objects for cleaning the glass surface. The
surfaces can be scratched or destroyed.
• Always consider the application and safety notes
of the detergent.
Removing the oven door
For cleaning and easier access to the oven chamber,
the appliance door can be unhinged.
• Open the appliance door completely.
• Fold the opposite retaining brackets of the hinges
upwards.
• Close the appliance door slightly and lift it out up-
wards.
• When inserting the door, make sure that the notch
of the hinge fits correctly on the protrusion of the
hinge holder.
• Fold the retaining brackets back down, otherwise
the hinges may be damaged when closing the ap-
pliance door.
Cleaning the oven
NOTE:
By cleaning after each use, you avoid that cooking
residues, soiling burn in during the next operation.
Cleaning is then only possible with a lot of effort.
• Depending on the degree of soiling and the sur-
face, clean the appliance and accessories only
with a soft, damp cloth and commercially availa-
ble, food-safe cleaners.
• Soak stiffly soiled areas with a little warm dish-
washing liquid or vinegar cleaner.
• Wipe off grease residues on the seal surrounding
the cooking chamber.
• After cleaning, use a soft absorbent cloth to dry.
Cleaning the side racks
Always remove the side racks when you want to
clean the oven walls thoroughly. You can soak heav-
ily soiled side racks when they are removed to make
cleaning easier.
• Remove the rack by slightly bending the lowest
metal rod to loosen it from the mounting screw
and pulling it towards the oven center.
• Lift the rack upwards out of the upper mounting
holes.
• Replace the racks after cleaning and drying them
thoroughly.
Cleaning the glass panes
If necessary, clean the inside of the glass panes.
• Open the oven door.
• Remove the support bar by loosening the screws
on the side of the bar.
• Carefully remove the glass panes forward from
the holder.
• Replace the glass panes and fasten the retaining
strip after you have cleaned and thoroughly dried
the glass.
32

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis