Installation Instructions; Overall Dimensions - Perry Electric 1GA 48917MET/P Montageanleitung

INSTALLATION INSTRUCTIONS

OVERALL DIMENSIONS

120
surface mounted
40
1.i - INSTALLATION OPERATIONS
CURRENTLY NATIONAL STANDARDS ENFORCEABLE IN
THE INSTALLATION COUNTRY COVERING THE
INSTALLATION AND USE OF GAS POWERED EQUIPMENT
ARE TO BE RESPECTED, AS ARE STANDARDS
COVERING SMOKE DISPERSION AND VENTILATION OF
ENCLOSED AREAS, EVEN THOUGH GAS DETECTION
EQUIPMENT IS INSTALLED.
82
ON TEST RESET
semi flush mounted
(with optional support
may be purchased separately)
27,5
30 cm
min. 1 m
max. 4 m
ON TEST RESET
Natural gas detector
LPG detector
min. 1 m
ON TEST RESET
max. 4 m
30 cm
•
Install Natural Gas detector max. 30 cm from ceiling
•
Install LPG detector max. 30 cm from floor
•
Install detectors from 1 to 4 m from gas appliances.
•
Do not install the detectors outdoors or in places exposed to atmospheric agents.
•
Do not install the detectors near: sink, air vents, HVAC appliances or windows;
furthermore, the detectors must not be installed in enclosed spaces, such as
behind a curtain or inside a closet.
Example of installation with 3 gas detectors connected through BUS.
A - Main unit with solenoid valve control.
B - Remote unit 1
C - Remote unit 2
ON TEST RESET
A
Solenoid
valve
Fig. 10
ON TEST RESET
ON TEST RESET
ON TEST RESET
ON TEST RESET
ON TEST RESET
Fig. 9
.
.
ON TEST RESET
BUS
C
BUS
ON TEST RESET
B
Boiler
G
B
15