Calibrate Temperature Display; Simulation Mode - Navman Speed 100 Bedienungsanleitung

Calibrate Temperature Display

To adjust the temperature displayed.
Follow the chart on the left to reach Temperature
Calibration mode.
3 SEC
DISPLAY
To increase reading press the key.
To decrease reading press the key.
To enter the calibration setting into memory and
exit press the key.

Simulation Mode

The NAVMAN S100 has a simulation mode.
To enter this mode, hold down the key and
then switch on the power. The instrument will
remain in this mode even when power is
switched off.
Repeat this procecedure to exit simulation mode.
Note:
Settings that are made while in
simulation mode will remain in effect
after returning to normal mode.
NAVMAN S100 User Manual 11