Before Use - SOLAC Leviter Digital Gebrauchsanleitung

Downloaded by: pd-oliana on 06-09-2022 09:50 CEST
EN
(Original instructions)
DESCRIPTION
A. Digital and tactile control panel
1 ON / start / pause button
2 Heating and operation indica-
tor lights
3 Menu button
4 Temperature setting
5 Time setting
B. Air outlet
C. Power cable and plug
D. Outer pan
E. Frying basket
F. Basket open button protection
G. Basket open button
H. Basket handle
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Fully extend the appliance's power cable
before each use.
Do not use the appliance if the parts or
accessories are not properly fitted.
Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
Do not use the appliance when empty.
Do not use the appliance if the timer switch
does not work properly.
Do not move the appliance while in use.
To keep the non-stick treatment in good
condit ion, do not use metal or pointed utensils
on it.
Do not force the appliance's work capacity.
Respect the MAX level.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Do not store or transport the appliance if it is
still hot.
Never leave the appliance connected and
unattended if is in use. This saves energy and
pro longs the life of the appliance.
Use only utensils appropriate to support high
temperatures.
Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the is
switched off permanently.
As a reference, in the annexed table you
will find a recommendation on the cooking
temperature and time for several meals.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that the entire product's packaging
has been removed.
Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE:
Unroll the cable completely before plugging it
in.
Connect the appliance to an earthed mains
socket.
The control panel ON button will light up.
Open the basket and place the ingredients you
wish to fry, roast or cook into the basket.
Put the pan back into the appliance.
Note: Never use the pan without the basket
inside it.
Note: Always handle the pan by means of the
basket and its handle. Do not touch it if it is
hot.
Press the ON button on the control panel, the
control panel will light up.
*The control panel will display the pre-set 15
minutes and 180ºC program.
Temperature and time
You can change the time and temperature by
using the +/- symbols
Pre-set programs
This appliance has 9 pre-set programs
To select the program, press the menu
buttonyou can move from one program to the
next by pressing this button.
*If you wish, you can also change the
temperature and time settings for the pre-set
programs.
Once the program has been selected, press
the start button to start heating.