Beetronics 22HD7M Bedienungsanleitung Seite 8

S A F E T Y P R E C A U T I O N S & M A I N T E N A N C E
Operating temperature: -20c° to +60c°
Storage temperature: -20c° to +70c°
Humidity level: 20% - 90% non-condensing
NOTICE! Do not press on the LCD panel or edge of the frame, as this may result in display malfunctions, such as interference patterns, etc.
If pressure is continuously applied to the LCD panel surface, the liquid crystal may deteriorate or the LCD panel may be damaged.
NOTICE! Do not scratch or press the LCD panel with any sharp objects, at this may result in damage to the LCD panel. Do not attempt to
brush with tissues as this may scratch the panel
NOTICE! Stains on the cabinet and LCD panel surface can be removed by moistening part of a soft cloth with water or by using a screen
cleaner (available as an option). Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the
cabinet or LCD panel, and also quality deterioration of the image. Never use thinner, benzine, wax, or abrasive cleaner as they may damage
the cabinet or LCD panel surface.
Important information for Burn-in/Ghosting
Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh
application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period
may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen.
"Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or
"after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off.
WARNING! Failure to activate a screen saver, or a periodic screen refresh application may result in severe "burn-in" or
"after-image" or "ghost image" symptoms that will not disappear and cannot be repaired. The damage mentioned above is not
covered by the warranty.
Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the
operating instructions given in this manual have been followed.
07 EN