Operating the monitor
Accessories
OPTIONAL DIMMER (DMK1)
01.
Most monitors have a 3.5mm jack at the back labeled dimmer. Connect the 3.5mm jack into the corresponding port on the monitor. If the
monitor does not have the dimmer input, the monitor is not compatible with the DMK1.
02.
Open the menu and set the backlight option to Knob.
03.
Exit the menu.
04.
You can now control the backlight brightness by turning the dimmer knob.
OPTIONAL INFRARED EXTENDER (IRC7)
01.
Most monitors have a 3.5mm jack at the back labeled IR. Connect the 3.5mm jack into the corresponding port on the monitor. If the
monitor does not have the IR input, the monitor is not compatible with the IRC7.
02.
The IR extender is now ready for use with your remote control.
O P E R A T I N G T H E M O N I T O R
13 EN