Product Description; Intended Use; Improper Use; Conformity - WEBTEC hidramatic HPM7000-BS Kurzanleitung

2.1

Intended Use

The HPM7000, subsequently referred to as "device", enables
access to sensors used in hydraulic applications in machines
and vehicles. The various connections can be used to compile,
store, monitor and evaluate CAN bus data, digital or analog
sensor signals for pressure, temperature, volume flows,
frequencies, speeds, particles, water in oil, volumes and output,
for example.
The device is exclusively designed for commercial use in mobile
and stationary systems.
2.2

Improper Use

All usage and conditions of use which are contrary to those
described in Section "Intended Use" are deemed to be
unintended use and lead to loss of all rights to claims under
the terms of guarantee, warranty and liability in respect of the
manufacturer.
■ The device does not comply with Directive 94/9/EC
and, therefore, must not be used in potentially explosive
atmospheres.
2.3

Conformity

The device fulfills the requirements of the following standards
and legal regulations:
2.4

Equipment Supplied

Check the parts included in the supply package prior to starting
up the device. If anything is missing, please contact your sales
outlet.
■ The HPM7000
■ Power adapter (HPM7000-AC-PSU, 110/240 VAC – 24 VDC
/ 3.750 mA)
■ Country adapters (EN, US, UK, AUS)
■ USB cable (2.0)
■ Quick reference manual
CE conformity
The device complies with the directives,
standards and standard-bound documents
specified in the Declaration of Conformity.

Product Description

5