Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Maintenance and cleaning
Service life of product extends and
frequently experienced problems will be
reduced if it is cleaned at regular intervals.
6.1 Cleaning Lint Filter /
Loading Door Inner Surface
Lint and fiber released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
C
Such fiber and lint are generally
formed during wearing and
washing.
A
Always clean the lint filter and the
inner surfaces of the loading door
after each drying process.
C
You can clean the lint filter
housing with a vacuum cleaner.
To clean the lint filter:
•
Open the loading door.
•
Remove the lint filter by pulling it up and
open the lint filter.
•
Clean lint, fiber, and cotton raveling by
hand or with a soft piece of cloth.
•
Close the lint filter and place it back into
its housing.
Dryer / User Manual
•
A layer can build up on the filter pores
that can cause clogging of the filter after
using the dryer for a while. Wash the
lint filter with warm water to remove
the layer that builds up on the lint filter
surface. Dry the lint filter completely
before reinstalling it.
•
Clean the entire inner surface of the
loading door and loading door gasket
with a soft damp cloth.
55 / EN
Werbung
Inhaltsverzeichnis
